Qu'est-ce que le système Unicount Koax et quels sont ses avantages ?

Le système Unicount Koax est une unité d'installation ultra-compacte regroupant les compteurs d'eau d'appartements et les robinets d'arrêt dans un seul boîtier encastré. Ses principaux avantages incluent un gain de place significatif, une installation plus rapide et économique, ainsi qu'une esthétique soignée grâce à une plaque de recouvrement qui rend le comptage totalement invisible.

Pourquoi le système est-il qualifié de neutre durant le gros oeuvre ?

Grâce à son processus logique, l'Unicount Koax reste neutre durant la phase du gros oeuvre. L'installateur peut poser l'unité sans avoir à choisir immédiatement le type de capsule de mesure, le prestataire de service ou la technique de relevé (Radio ou M-Bus). Ces décisions peuvent être prises à tout moment après l'achèvement de la construction.

Avec quels systèmes de bâti-support l'Unicount Koax est-il compatible ?

L'Unicount Koax est compatible avec Geberit (GIS et DUOFIX), Nussbaum (Optivis) et TECE (TECEprofil). Il est également compatible avec tous les modèles de capsules de mesure KOAX 2 pouces.

Quelle est la différence entre les modèles Box, T et Light ?

Unicount Koax Box : solution complète universelle avec gainage synthétique. Unicount Koax T : solution discrète sous le lavabo avec raccords adaptés. Unicount Koax Light : solution simple sans boîtier de gainage, parfaite pour armoires techniques ou gaines.

Quelles sont les caractéristiques techniques de résistance et d'acoustique ?

Résistance à la pression : Min. 25 bars (SN EN 1213). Température maximale : 90°C. Groupe acoustique : Groupe I (ISO 3822). Maintenance : robinets avec sièges inox, tournevis cruciforme.

Peut-on changer de technique de relevé après l'installation ?

Oui. Le remplacement des capsules de mesure ou le changement de technique de relevé (Radio ou M-Bus) est possible à tout moment sans aucun démontage de l'installation murale.

Apartment Water Metering

Unicount Koax Light 2'' Unicount Koax T (With T-piece) Unicount Koax OT (Without T) Unicount Koax Box Accessories & Spare Parts

There are 14 products.

Sort by:

3/4" Cap Flat Gasket Unicount Koax – Spare Part | Water Meter Accessory Switzerland

A21975-001-000 3/4" Cap with Flat Gasket – Unicount Koax (1 piece)

CHF31.00

Construction Site Protection Unicount Koax – Complete Set | Switzerland

A20928-001-000 Construction Site Protection for 1 Unicount Koax Body – Complete Set

CHF25.00

Chrome Cover Plate Unicount Koax – Design Finish | Switzerland

A20929-001-008 Chrome Cover Plate for Unicount Koax – Design Finish

CHF45.00

Connection Plate Geberit GIS Unicount Koax – Spare Part | Switzerland

A21916-001-000 Connection Plate for Geberit GIS In-Wall System – Unicount Koax (1 piece)

CHF27.00

Connection Plate Nussbaum Optivis Unicount Koax – Spare Part | Switzerland

A21918-001-000 Connection Plate for Nussbaum Optivis In-Wall System – Unicount Koax (1 piece)

CHF24.98

Connection Plate TECEprofil TECE Unicount Koax – Spare Part | Switzerland

A21919-001-000 Connection Plate for TECEprofil TECE In-Wall System – Unicount Koax (1 piece)

CHF24.98

Ø 54-56 mm Pipe Clamp Unicount Koax – Drain Pipe Fixing Set | Switzerland

A21942-001-000 Ø 54-56 mm Pipe Clamp – Drain Pipe Fixing Set Unicount Koax

CHF9.00

M8x25 Fixing Screw Geberit GIS Unicount Koax – Spare Part | Switzerland

A21946-001-000 M8x25 Fixing Screw for Geberit GIS In-Wall System – Unicount Koax (1 piece)

CHF6.48

M8x25 Fixing Set Geberit DUOFIX Unicount Koax – Spare Part | Switzerland

A21947-001-000 M8x25 Fixing Set for Geberit DUOFIX In-Wall System – Unicount Koax (1 piece)

CHF5.55

Fixing Batten Unicount Koax Box – Spare Part | Switzerland

159485-001-000 Fixing Batten for Unicount Koax Box (1 piece)

CHF10.00

Noise Dampening Nozzle EPDM Unicount Koax – Anti-Vibration | Switzerland

157062-001-000 Noise Dampening Nozzle – Anti-Vibration Unicount Koax (1 piece)

CHF4.00

Connection Plate Geberit DUOFIX Unicount Koax – Spare Part | Switzerland

A21917-001-000 Connection Plate for Geberit DUOFIX In-Wall System – Unicount Koax (1 piece)

CHF24.98

Showing 1-12 of 14 item(s)

What is the Unicount Koax system and what are its advantages?

The Unicount Koax system is an ultra-compact installation unit combining apartment water meters and shut-off valves in a single recessed housing. Its main advantages include a significant space saving, faster and more cost-effective installation by eliminating separate shut-off valves, and a refined aesthetic thanks to a cover plate that makes metering completely invisible.

Why is the system described as "neutral" during the structural phase?

Thanks to its logical process, the Unicount Koax remains neutral during the structural phase. The installer can fit the unit without immediately choosing the type of measuring capsule, service provider or data collection method (Radio or M-Bus).

These decisions can be made at any time after construction is complete, offering total technological and financial flexibility.

Which installation frame systems is the Unicount Koax compatible with?

The Unicount Koax is designed for universal compatibility with the leading installation systems on the Swiss market. It is available in specific versions for:

Geberit (GIS and DUOFIX) — Nussbaum (Optivis) — TECE (TECEprofil)

It is also compatible with all KOAX 2-inch measuring capsule models.

What is the difference between the Box, T and Light models?

Unicount Koax Box — The complete universal solution with synthetic lining, ideal for wet or dry tiled constructions, preventing any water infiltration behind the wall.

Unicount Koax T — The refined solution specifically designed for discreet under-basin installation with adapted connections.

Unicount Koax Light — The simple solution, without lining housing or aesthetic plate, perfect for mounting in technical cabinets or ducts.

What are the technical specifications for pressure resistance and acoustics?

Characteristic	Value
Pressure Resistance	Min. 25 bar (SN EN 1213)
Maximum Temperature	90 °C
Acoustic Group	Group I (ISO 3822)
Maintenance	Valves with stainless steel seats, Phillips screwdriver

Can the data collection method be changed after installation?

Yes, this is one of the system's major strengths. Replacing the measuring capsules or changing the data collection method — switching from manual to Radio or M-Bus — is possible at any time.

This operation requires no dismantling of the wall installation, preserving the integrity of the tiling and avoiding any additional renovation costs.